Telex IP-223 - Manual (Page 13)

15
Operating Modes
NOTE: Transient protection is provided near all audio inputs and outputs. The IP-223 line transformers are not designed
to operate on lines carrying DC (direct current). If a voltage is on the line, isolate with external capacitors. If the
line termination must conduct direct current, install a 600:600 Ohm transformer designed for the current
involved.
IP-223 Accessories
There are several optional accessories available for the IP-223:
Part Number Description
223RACK 1 unit high rack shelf to hold up to two (2) IP-223 units
2490248 Alignment Handset
730153 Power Supply
301611000 Fleetsync Over the Air Decode
301611004 FleetSync Encode/Decode
301611001 MDC Over the Air Decode
301912000 NI-223
PRD000003000 IP223 to EFJohnson 5300 Mobile Radio Advanced Control Interface Box
301953000 IP223DB9Splitter - Serial Port splitter cable DB9
301956000 IP223CAB150/180 - IP223-Kenwood TK-150/180 cable
301957000 IP223CAB90 - IP223-Kenwood TK-90 cable
301969000 IP223CABCDM1250 - IP-223-Motorola CDM and GM cable
301961000 IP223CAB2000 - IP-223-Sepura SRM2000 cable
879794 IP223CAB Tone - IP-223-Dual DB25 Tone cable 24ft.