Toshiba GD-1200 User Manual
Page 73
71
4
2
To cancel the job, press the [JOB CANCEL] button while scanning is
paused.
• To resume scanning, press the [START] button on the control panel.
• When the [JOB FINISH] button is pressed, the scanned data of the original(s) start to be transmitted.
• To change the setting of the scanning conditions, press the [OPTION] button. ( P.33 “Setting the scanning
• If you do nothing for about 45 seconds after the pause of the transmission, the transmission that is currently
being scanned is cleared from the memory.
3
Press the [YES] button.