Olympus IX81-ZDC2 - Manual (Page 4)

1
1. The focus drift compensation function uses a laser diode (wavelength 785 nm) for autofocusing. It is designed to be safe
by reducing the laser power (Class 1), it is still not recommended to view the laser light directly by removing the cover, etc.
Never remove the warning and caution labels on the microscope.
The semiconductor laser for autofocusing incorporated in this unit makes it designated as a product of the following
class.
CLASS 1 LASER PRODUCT (IEC60825-1:1993+A1:1997+A2:2001)
2. Never attempt to remove the cover using a tool. There is a risk of exposure to the internal strong laser beam as well as
other malfunction or failure.
[Semiconductor laser, wavelength 785 nm, output (max.) 85 mW, equivalent to Class 3B]
3. Always use the power cord provided by Olympus. If the proper power cord is not used, product safety performance
cannot be warranted.
4. Always ensure that the grounding terminal is properly grounded. If the equipment is not grounded, Olympus can no
longer warrant the electrical safety performance of the equipment.
5. Distribute the connection cables at a distance from the lamp housing. If a connection cable contacts the lamp housing
or its surroundings, the cable may be melted and cause n electric shock hazard.
6. Never insert metallic objects into the air vents of the microscope as this could result in electrical shock, personal injury
and equipment damage.
7. To prevent the microscope system from falling down, do not install modules which cause the microscope system height
to exceed 1 meter.
8. Do not use an objective other than those specified to be applicable (see page 4).
Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment
in the safest possible manner.
Symbol Explanation
Before use, carefully read the instruction manual. Improper use could result in personal injury to
the user and/or damage to the equipment.
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
IMPORTANT
} The IX81-ZDC2 microscope features the capability of compensating for the focus drift that poses problems
during long hours of time-lapse observation of live cells.
The microscope has two focus drift compensation modes including the one-shot mode and continuous focus
mode, which are to be selected according to the observed specimen.
} This manual pertains only to the information related to the IX81-ZDC2 (focus drift compensation) facility of the
microscope. Please also refer to the instruction manuals for the microscope and associated modules.
} The IX81-ZDC2 can be controlled with the MetaMorph application software. For the compatible version of the
software, consult the respective company.
} For the applicable modules, contact Olympus or check the latest catalogue for this product.
Safety Precautions
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No.50, dated (June 24, 2007).