TOA Electronics BA-800 - Manual (Page 16)

4.5. Speaker Connections [BA-823]
OUTPUT
SPEAKER (RIGHT)
SPEAKER (LEFT)
Low impedance speakers (4 to 16
The type of speakers connectable to each channel are those with impedance of over 4 . When connecting
multiple speakers, the total speaker impedance must be over 4 . If under 4 , a protective circuit is
triggered to prevent the equipment's normal operation, or equipment failures will occur.
Use speakers with permissible input of over 30W. Note that if the power exceeding the permissible input is
applied to the speaker, the speaker may be damaged.
4.6. Timer Connections [BA-800, BA-806 and BA-823]
Connect the rear-mounted terminals to the timer's no-voltage contacts.
Make duration needs to be 200msec or more.
— 16 —