Transition Networks SISPM1040-182D - Manual (Page 68)

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
6.13 Port Statistics
The following chart provides the current statistic information which displays the real-time
packet transfer status for each port. The user might use the information to plan and
implement the network, or check and find problems when collisions or heavy traffic
occurs.
„ Port: The port number.
„ Type: Displays the current speed of connection to the port.
„ Link: The status of linking—‘Up’ or ‘Down’.
„ State: It’s set by Port Control. When the state is disabled, the port will not transmit
or receive any packet.
„ Tx Good Packet: The counts of transmitting good packets via this port.
„ Tx Bad Packet: The counts of transmitting bad packets (including undersize [less
than 64 octets], oversize, CRC Align errors, fragments and jabbers packets) via this
port.
„ Rx Good Packet: The counts of receiving good packets via this port.
„ Rx Bad Packet: The counts of receiving good packets (including undersize [less
than 64 octets], oversize, CRC error, fragments and jabbers) via this port.
„ Tx Abort Packet: The aborted packet while transmitting.
„ Packet Collision: The counts of collision packet.
„ Packet Dropped: The counts of dropped packet.
„ Rx Bcast Packet: The counts of broadcast packet.
„ Rx Mcast Packet: The counts of multicast packet.
„ Click Clear button to clean all counts.