Tripp Lite HCRK-INT - Manual (Page 6)

6
Remote User Interface (RUI) Mounting
Mount the Remote User Interface in a variety of positions on any flat surface using included
double-sided tape.
CAUTION!
The double-sided tape quickly forms an extremely strong bond. This ensures the RUI
will remain securely in position, meeting the requirements of demanding medical environments.
Due to the tape's strong bond, position the RUI exactly where desired before pressing it
into place.
2
Mounting
continued
Mounting on a Bottom Shelf (Using Existing Shelf)
Note: The diagrams below represent a suggested arrangement of the power supply and battery
module. Depending on the size of the existing shelf, you can arrange the power supply and battery
module any way you desire as long as you don't cover up any outlets, ports, ventilation fans/slots or
other features.
Power Supply Module &
Battery Module Mounting
Apply strips of double-sided tape to the sides of
the Power Supply Module and Battery Module
that will face down (see diagram for suggested
orientation) when placed on the cart.
CAUTION!
The double-sided tape quickly
forms an extremely strong bond.
This ensures the modules will remain
securely in position, meeting the
requirements of demanding medical
environments. Due to the tape's strong bond,
position the modules exactly where desired
before pressing them into place.
Carefully lift Power Supply Module and Battery
Module, center them over the existing shelf and
press down to bond the tape.
1
1
2
1A
1B
Remote User Interface
(RUI) Mounting
Mount the Remote User Interface in a
variety of positions on any flat surface using
included double-sided tape. Read caution
above concerning double-sided tape.
2
1A
1B
200702102 93-2657 HCRKINT Retrofit Kit OM.qxd 4/27/2007 11:33 AM Page 6