Tektronix 070-9180-01 - Manual (Page 31)

Command Syntax
Option 01 VXI Interface Module User Manual 3–5
H VX4350 General Purpose Switching module:
The range of this field is 1 to 64. It specifies one of 64 relays on the
VX4350.
H VX4380 Matrix: ! !
The range of the first field is 1 to 4. It specifies the row of a relay in
one of the sections of the VX4380. The range of the second field is 1
to 16. It specifies the column of a relay in one of the sections of the VX4380.
The range of the third field is 1 to 4. It specifies a section of the
VX4380. A one dimensional may also be used to specify a
channel on a VX4380 Module. The one dimensional is
given by the formula:
( (section – 1 )
×
64 ) + ( ( row – 1 )
×
16 ) + column
where variables “section” and “row” and “column” are section, row, and
column numbers specified in a three-dimensional .
A list of channel numbers on one or more relay modules.
The limits on the channel numbers in a depend on the model
number of the relay module(s) specified in the . The syntax of a
is shown in the following diagram:
! :
!
( @ (
,
) )
,
A module_name is an ASCII string that has been associated with a relay module
in a ROUTe:MODule:DEFine command. A channel_range may consist of a
single or a range of s. A range of nel_spec>s is indicated by two s separated by a colon (:)
character. A may have one, two or three dimensions depending
on the architecture of the relay module it applies to.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com