Selecting a language, Selecting a playback audio setting – Toshiba SD-360ESE User Manual
Page 43
43
A
d
vanced pla
ybac
k
Press AUDIO during playback.
The current audio setting is displayed.
Recorded audio format number
changes sequentially. (The maximum
number of possible audio formats is
8.)
The abbreviation of the language appears instead
of the language name. Refer to the list of languages
and their abbreviations
64
.
Press AUDIO while the audio setting is
displayed on the TV screen.
Each time you press the AUDIO
button, the audio settings included on
the DVD video disc change.
The audio setting display will disappear after a few
seconds.
Selecting a Language
You can select a preferred language and sound recording system from
those included on the DVD video disc.
Selecting a playback audio setting
1
2
Selecting sound channels of VIDEO CDs
Press AUDIO repeatedly during
playback to hear a different audio
channel (stereo, Left or Right).
Notes
• When you turn on the DVD video player or replace a disc,
player returns to the initial default setting
63
.
If you select a sound track which is not included on the disc,
the DVD video player plays a prior sound track programmed
on the disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections
on the disc menu.
e.g.
Output sound conversion table
AUDIO
• Signals of 96kHz from the
COAXIAL DIGITAL AUDIO OUT
jack are depressed to 48 kHz by
down sampling process when:
– “3D Effects On” is selected.
40
– a copyright protected disc is
played.
• Quantization bit of signals of 20
bit or higher which is output from
the COAXIAL DIGITAL AUDIO
OUT jack is 16 bit if they are in a
copyright protected disc.