Toshiba SD-360ESE - Manual (Page 24)

24
Connections
Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left front
speakers).
Amplifier equipped with
a digital audio input
• Make the following setting.
On-screen display Select: Page
“PCM” “Digital Output” 61
To wall
outlet
To COAXIAL
type digital
audio input
75
Ω
coaxial cable (not supplied)
To COAXIAL
DIGITAL
AUDIO OUT
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic realistic
sound by connecting an amplifier equipped with an MPEG2 audio decoder or
MPEG2 audio processor.
• Use DVD video discs encoded via
the MPEG2 recording system.
• Make the following setting.
On-screen display Select: Page
“PCM” or
“Raw”
“Digital Output”
Recording system MPEG2 43
61
To COAXIAL
DIGITAL
AUDIO OUT
To COAXIAL
type digital
audio input
75
Ω
coaxial cable (not supplied)
Amplifier equipped with an
MEPG2 audio decoder
To wall
outlet
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for
home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
channel DTS encoded sound tracks on DVD video discs or audio CDs.
• Use DVD video discs or audio CDs
encoded via the DTS recording
system.
• Make the following setting.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
On-screen display Select: Page
“Digital Output”
Recording system DTS
“Raw”
43
61
To COAXIAL
DIGITAL
AUDIO OUT
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
Amplifier equipped with a
Dolby Digital decoder
To wall
outlet