Connecting to an amplifier equipped with a dolby, Digital decoder – Toshiba SD-360ESE User Manual
Page 23
23
Connections
Connecting to an amplifier equipped with a Dolby
®
Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest
movies, and is now available to reproduce this realistic effect in the home. You can
enjoy motion picture and live concert DVD video discs with this dynamic realistic
sound by connecting the DVD video player to a 6 channel amplifier equipped with a
Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro
Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD
movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles
with the Dolby Surround mark.
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting
an amplifier and speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
* Connect one or two rear speakers.
The output sound from the rear speakers will
be monaural even if you connect two rear
speakers.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished
works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording system.
• Make the following setting.
On-screen display
Select:
Page
“PCM” or
“Raw”
“Digital Output”
Recording system
D
• Make the following setting.
On-screen display
Select:
Page
“Digital Output”
“PCM” or
“Raw”
43
61
61
To COAXIAL
DIGITAL
AUDIO OUT
To COAXIAL
type digital
audio input
75
Ω
coaxial cable (not supplied)
Amplifier equipped with a
Dolby Digital decoder
To wall
outlet
Audio cable (not supplied)
To ANALOG
AUDIO OUT
To audio
input
To wall
outlet
Amplifier equipped with
Dolby Surround Pro Logic