Adding a port translation rule, Chapter 5 – Technicolor - Thomson SpeedTouch 780 (WL) User Manual
Page 79
71
E-DOC-CTC-20051017-0153 v1.0
Chapter 5
SpeedTouch™ Web Interface
Adding a Port
Translation rule
Proceed as follows:
1
Click the Edit link of the TCP/UDP port definition of the game or application.
2
In the Protocol list, click the protocol the game or application uses.
3
In the Port Range box, type the port range the game or application uses.
4
In the Translate To box, type the port range to which the SpeedTouch™ has to
translate the ports specified under Port Range.
5
If you want to make a dynamic translation rule you must specify a trigger
protocol and port.
6
Click Apply.
As soon as the SpeedTouch™ receives outgoing traffic on this trigger
port, it will activate this translation rule.