Toshiba 56HMX96 - Manual (Page 36)

36
HMX96 (E/F) Web 213:276
Chapter 5: Using the TV’s features
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (
=) button if selecting a digital
channel).
3
Press R on the remote control. The previous channel
will display. Each time you press R, the TV will switch
back and forth between the last two channels that were
tuned.
Note: If you press R from a non-antenna input, the TV
will return to the last-viewed ANT input and channel.
Switching between two channels using
SurfLock
™
The SurfLock ™ feature temporarily “memorizes” one channel
in the R button, so you can return to that channel quickly
from any other channel by pressing R.
To memorize a channel in the R button:
1
Tune the TV to the channel you want to program into the
R button.
2
Press and hold R for about 2 seconds until the message
“Channel Memorized” appears on-screen. The channel
has been programmed into the
R button.
3
You can then change channels repeatedly, and when you
press
R, the memorized channel will be tuned.
The TV will return to the memorized channel one time only.
Once you press
R and then change channels again, the
CH RTN memory will be cleared and the button will function
as Channel Return, by switching back and forth between the
last two channels that are tuned.
HMX96_EN.book Page 36 Friday, April 28, 2006 12:03 PM