Oki 390 User Manual

Page 96

ML390/391 Turbo Printer Handbook

Proportional Spacing

Select 10 cpi Pitch (Pica)

Select 12 cpi Pitch (Elite)

Select 15 cpi Pitch

Select Compressed Print

Cancel Compressed Print

Set Character Spacing

Select horizontal motion
index (HMI)

Select Italic Characters

Cancel Italics

ASCII: ESC p n
Dec: 27 112 n
Hex: 1B 70 n

ASCII: ESC P
Dec: 27 80
Hex: 1B 50

ASCII: ESC M
Dec: 27 77
Hex: 1B 4D

ASCII: ESC g
Dec: 27 103
Hex: 1B 67

ASCII: SI or ESC SI
Dec: 15 or 27 15
Hex: 0F or 1B 0F

ASCII: DC2
Dec: 18
Hex: 12

ASCII: ESC SP n
Dec: 27 32 n
Hex: 1B 20 n

ASCII: ESC c n

Dec: 27 99 n

Hex: 1B 63 n

ASCII: ESC 4
Dec: 27 52
Hex: 1B 34

ASCII: ESC 5
Dec: 27 53
Hex: 1B 53

Epson
Function

Commands
(ASCII, Decimal, Hexadecimal)

m>5: m /360 inch
Point size=(n

+ [n

x 256]) x 0.5 point

Point size can be selected between a
minimum of 8 point to a maximum of 64
point.

See also ESC ! n command.
n=1: Start proportional spacing
n=0: Stop proportional spacing

Normally, selects 10 cpi (Pica). In com-
pressed mode, selects 17.1 cpi.

Normally, selects 12 cpi (Elite). In com-
pressed mode, selects 20 cpi.

Selects 15 cpi pitch.

Pitch depends on current pitch selected:
10 cpi becomes 17.1 cpi
12 cpi becomes 20 cpi

Cancels 15 cpi print selected by SI or
ESC SI command.

Adds n dots of space (depending on the
current pitch) between characters.
n=0 to 127

Sets the amount of space between char-
acters (HMI).
HMI= (n

+ [n

x 256])/ 360 inch.

The specification is invalid if HMI ex-
ceeds 3 inches.
The command is invalid when n

=0.