Tally Genicom Tally Mono Laser T9220 User Manual
Page 205
E.12
9
Press the scroll button (
or
) to display “Yes” on the
bottom line. Press the Enter button (
), and then press
the Upper Level button (
).
10
Press the Upper Level button (
), then use the scroll
button (
).
11
Press the Enter button (
) when “IPX Frame Type”
displays.
12
Press the scroll button (
) until you see the desired frame
type and press the Enter button (
).
13
Press the scroll button (
or
) to change the setting and
then press the Enter button (
).
14
Repeat steps 12 and 13 to configure another frame type, if
necessary.
Restoring the Network Configuration
You can return the network configuration to its default settings.
1
Press the Menu button (
) until you see “Network” on the
bottom line of the display.
2
Press the Enter button (
) to access the menu.
3
Press scroll button (
or
) until “Default Set” displays
on the bottom line.
4
Press the Enter button (
) to confirm the selection.