Solving print quality problems – Tally Genicom Tally Mono Laser T9220 User Manual

Page 140

OLVING

ROBLEMS

7.15

Solving Print Quality Problems

The dirty inside of the printer or improper paper loading may
reduce the print quality. See the table below to troubleshoot the
problem.

Problem

Solution

Light or faded

If a vertical white streak or faded area appears on the page:
• The toner supply is low. You may be able to temporarily

extend the toner cartridge life. See “Redistributing Toner”
on page 6.4. If this does not improve the print quality,
install a new toner cartridge.

• The paper may not meet paper specifications (for

example, the paper is too moist or too rough). See “Paper
Specifications” on page G.3.

• If the entire page is light, the print resolution setting is

too light or Toner Save Mode is on. Adjust the print
resolution and Toner Save Mode in the printer properties.
See page 5.25 and page 5.9 respectively.

• A combination of faded or smeared defects may indicate

that the toner cartridge needs cleaning. See “Cleaning the
Inside” on page 6.7.

• The surface of LSU may be dirty. Clean the LSU. See

“Cleaning the Inside” on page 6.7.

Toner specs

• The paper may not meet specifications (for example, the

paper is too moist or too rough). See “Paper
Specifications” on page G.3.

• The transfer roller may be dirty. See “Cleaning the Inside”

on page 6.7.

• The paper path may need cleaning. See “Cleaning the

Inside” on page 6.7.