Tally Genicom Tally Mono Laser T9220 User Manual
Page 204
E.11
E
Note that the IPX/SPX protocol must be enabled in the Netware
menu before you can configure frame types. See “Setting
Network Protocols” on page E.7.
Take the following steps to change the frame type format:
1
Press the Menu button (
) until you see “Network” on the
bottom line of the display. Press the Enter button (
) to
access the menu.
2
Press the Enter button (
) when “Config Network”
displays on the bottom line.
3
Press the scroll button (
or
) to display “Yes” on the
bottom line. Press the Enter button (
).
4
Press the Upper Level button (
).
5
Press the scroll button (
or
) until “Netware” displays
on bottom line. Press the Enter button (
).
6
Press the Enter button (
) when “On” displays.
7
press the Upper Level button (
), then use the scroll
button (
).
8
Press the Enter button (
) when “Config Netware”
displays.