beautypg.com

Special playback, 71 en, Zoom – Toshiba DVR670KU User Manual

Page 71: Marker setting

background image

71

EN

Disc

Management

Recording

Playback

Introduction

Connections

Basic Setup

Editing

Function Setup

VCR Function

Others

SPECIAL PLAYBACK

Zoom

Note

• When selecting a smaller factor than the current one,

the zoom area will not be displayed.

• To exit the zoom menu, press [RETURN] repeatedly.
• To cancel the zoom function, select “x1.0” using

[

K / L], then press [ENTER] at step 3.

• You cannot slide the zoomed picture on some JPEG

files.

Press [DVD] first.
1) During playback, press [DISPLAY] or [ZOOM].

• If you press [ZOOM], skip to step3.

2) Use [

{ / B] to select

to display the selection

menu.
e.g.) DVD-video

1/ 5

1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [

K / L] to select a desired zoom factor to zoom,

then press [ENTER].

1/ 5

1/ 5

DVD

Ч 1.2
Ч 1.5
Ч 2.0

0:01:00 / 1:23:45

Video

Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.

Zoom area will be displayed.

4) Use [

K / L / { / B] to select a desired zoom

position, then press [ENTER].

Zoom playback will start.

This feature allows you to assign a specific point on a disc
to be called back later.
Press [DVD] first.
1) During playback, press [DISPLAY] to bring up the

display menu.
If the display menu is already shown, skip to step 2.

2) Use [

{ / B] to select

to display the marker list.

e.g.) DVD-video

1/ 5

1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [

K / L] to select a desired marker number.

When it reaches the desired point, press [ENTER].

1/ 5

1/ 5

DVD

---
---
---
---
---
---

1

2

3

4

5

6

0:01:00 / 1:23:45

Video

The title (track) number and the time will be displayed.

4) To return to the marker:

Use [

K / L] to select the desired marker number,

then press [ENTER].

Marker Setting

Note

• To clear a marker, select the marker number to be

cleared, then press [CLEAR].

• All markers will be erased when you operate these

operations listed below.

– Opening the disc tray
– Turning the unit into the standby mode
– Recording on a recordable disc
• You can mark up to 6 points.