Toshiba DVR670KU User Manual
Page 61
61
EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
4
Use [
K / L] to select “VCR DVD”,
then press [ENTER].
Dubbing Mode
VCR DVD
DVD VCR
5
Press [SETUP] to exit.
Press [VCR].
6
Press [PLAY
B]. Then press
[PAUSE
F] at the point you wish to
start recording.
• Since it takes about a few seconds before the
actual dubbing begins, please allow extra 5
seconds when selecting the starting point.
7
Press [DVD], then press [REC MODE]
repeatedly to select the desired
recording mode.
8
Press [DUBBING].
VCR to DVD duplication will start.
9
Press [STOP
C] to stop the recording.
Title list will automatically appear.
• If you want to watch the duplicated material
after the VCR to DVD duplication, press [TOP
MENU] first then press [ENTER] twice.
DVD/VCR DUBBING
4
Use [
K / L] to select “DVD VCR”,
then press [ENTER].
Dubbing Mode
VCR DVD
DVD VCR
5
Press [SETUP] to exit.
Press [DVD].
6
Press [PLAY
B]. Then press
[PAUSE
F] at the point you wish to
start recording.
7
Press [VCR], then press [REC MODE]
repeatedly to select the desired
recording mode.
8
Press [DUBBING].
DVD to VCR duplication will start.
9
Press [STOP
C] to stop the recording.
VCR to DVD
DVD to VCR
Note
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.
• When “L3 (DV-IN)“ is selected as input, dubbing cannot be performed. Dubbing can be performed with either L1
or L2 inputs.
For DVD to VCR duplication:
• This function is available on Audio CD, not MP3, WMA, JPEG nor DivX® files.
• The recording mode for VCR cannot be displayed at step 7 when using HDMI / Component / S-Video connection.
To display the VCR recording mode on the screen, the unit must be connected by the VIDEO OUT jack and the TV’s
input select should be set to the appropriate external input channel.
For VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function.
This is not a malfunction. Be advised to playback the cassette tape until the picture is stabilized, then set the
starting point where you wish to start recording, and start VCR to DVD duplication.
• The playback sound mode is followed by the setting of VCR playback sound mode on page 113. Set the playback
sound mode to which you wish to record to the DVD.
• This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR
to DVD duplication.
• Dubbing indicator will appear on the front panel display during dubbing.