Vcr functions, 113 en, Time search other operations – Toshiba DVR670KU User Manual
Page 113
113
EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
VCR FUNCTIONS
Time Search
Other Operations
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Press [VCR] first.
1) Press [SEARCH] repeatedly so that “TIME SEARCH”
menu appears.
2) Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
TIME SEARCH
2:50
3) Press [REV
E], [FWD D] to start time search.
If you want to go in the forward direction, press
[FWD
D].
If you want to go in the reverse direction, press
[REV
E].
After time search, the unit will play back the cassette
tape automatically.
Note
• Index search and time search are not available
during recording.
• Press [STOP
C] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [FWD
D] to fast
forward the cassette tape.
Rewind:
When the unit is in stop mode, press [REV
E] to rewind
the cassette tape.
To cue or review picture during playback (picture search):
Press [REV
E], [FWD D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
Press [PAUSE
F]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [CH
/
] on
remote control.
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter reset:
Press [CLEAR] to reset the counter to “0:00:00”.
To playback in slow motion:
Press [PAUSE
F] during playback, then press [FWD D].
Press [FWD
D] or [REV E] repeatedly during slow
motion playback to select the desired speed.
Automatic rewind:
When a cassette tape is played back or fast forwarded to
its end, the cassette tape will rewind to the beginning,
stop and eject itself.
To repeat a playback indefinitely without touching
[PLAY
B] (Auto Repeat Playback):
During normal playback, press [REPEAT]. When a tape is
played to its end, the tape will rewind to the beginning and
start playback itself. To cancel the Auto Repeat Playback,
press [REPEAT] again.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO
] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select
“MONO”.
HIFI
Your Selection
Type of recorded tape
non Hi-Fi tapes
Hi-Fi tapes
recorded in
Hi-Fi stereo
Hi-Fi tapes
recorded second
audio program
Hi-Fi tapes
recorded main
audio program
MONO
Monaural
L+R
Main audio
program
Second audio
program
Monaural
R-channel
L-channel
R
Main audio
program
Second audio
program
Monaural
L
Main audio
program
Second audio
program
Note
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
• To return to playback from the picture search/still/
slow mode, press [PLAY
B].