Toshiba DVR670KU - Manual (Page 55)

55 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
1
Press [SETUP].
2
Use [
K / L] to select “General
Setting”, then press [ENTER].
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
3
Use [
K / L] to select “Video”, then
press [ENTER].
4
Use [
K / L] to select “Select Video”,
then press [ENTER].
5
Use [
K / L] to select the input jack
type to connect, then press [ENTER].
If you want to use VIDEO IN jack, select “Video
In”.
If you want to use S-VIDEO IN jack, select
“S-Video In”.
Select Video - L1 (Rear)
Video In
S-Video In
6 Press [SETUP] to exit.
IN
L
R
L
R
S-VIDEO IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
AUDIO OUT DV-OUT
L R
VIDEO
OUT
AUDIO OUT
L R
VIDEO
OUT
S-VIDEO
OUT
VIDEO L R DV
front of this unit rear of this unit
external device
(camcorder, VCR etc.)
DV cable
(4-pin)
RCA
video
cable
RCA
audio
cable
to L2 & L3
or
to L1
S-video
cable
RCA
video
cable
RCA
audio cable
or
L2 L3
L1
or
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front).
Use S-video or the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), use the DV input jack on the front panel instead of S-VIDEO IN or
VIDEO IN jack.
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
ENTER
INSTANT
SKIP
PLAY REV FWD
1.3x/0.8x
PLAY TIME SLIP
DTV/TV
ENTER
SETUP