Transcend Information TS32 - Manual (Page 16)

T T T S S S 3 3 3 2 2 2 / / / 6 6 6 4 4 4 / / / 1 1 1 2 2 2 8 8 8 G G G S S S S S S D D D 1 1 1 8 8 8 M M M - - - M M M
1.8” Portable Solid State Drive
Transcend Information Inc.
V1.2
16
Identify Device Information Default Value
Word Value F/V Description
0 0040h
F
X
X
X
V
X
General configuration bit-significant information:
15 0 = ATA device
14-8 Retired
7-6 Obsolete
5-3 Retired
2 Reserved
1 Retired
0 Reserved
1 3FFFh
F Number of logical cylinders
2 C837h
V Specific configuration
3 0010h
F Number of logical heads
4-5 0000h
X Retired
6 003Fh
F Number of logical sector per logical track
7-8 0000h
Reserved for assignment by the CompactFlash_ Association
9 0000h
X Retired
10-19 XXXXh
F Serial number (20 ASCII characters)
20-21 0000h
X Retired
22 0000h
X Obsolete
23-26 XXXXh
F Firmware revision (8 ASCII characters)
27-46 XXXXh
F Model number (40 ASCII characters)
47 8001h
F
F
F
15-8 80h
7-0 00h = Reserved
01h = Maximum number of 1 sectors on READ/WRITE MULTIPLE commands
48 0000h
F Reserved
49 2F00h
F
F
F
F
F
X
Capabilities
15-14 Reserved for the IDENTIFY PACKET DEVICE command.
13 1 = Standby timer values as specified in this standard are supported
0 = Standby timer values shall be managed by the device
12 Reserved for the IDENTIFY PACKET DEVICE command.
11 1 = IORDY supported
0 = IORDY may be supported
10 1 = IORDY may be disabled
9 1 = LBA supported
8 1 = DMA supported.
7-0 Retired
50 4000h
F
F
X
F
Capabilities
15 Shall be cleared to zero.
14 Shall be set to one.
13-2 Reserved.
1 Obsolete
0 Shall be set to one to indicate a device specific Standby timer value minimum.