Rear panel – TRENDnet TEW-435BRM User Manual

Page 8

Text mode
Original mode

Introduction

Rear Panel

Figure 3: Rear Panel

Power port

Connect the supplied power adapter here.

10/100BaseT
LAN connections

Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.

Note:

Any LAN port on the TEW-435BRM will automatically function as
an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.

Reset Button
(Reset to Defaults)

This button will reset the TEW-435BRM to the factory default
settings.
To do this, press and hold the Reset Button for five (5) seconds, until
the Status LED is lit, then release the Reset Button, and wait the
TEW-435BRM to restart using the factory default values.

WAN port
(ADSL port)

Connect this port to your ADSL line.