Static routing - example – TRENDnet TEW-435BRM User Manual
Page 73

Wireless ADSL Router User Guide
70
Destination IP Address
Normally 0.0.0.0, but check your router documentation.
Network Mask
Normally 0.0.0.0, but check your router documentation.
Gateway IP Address
The IP Address of the TEW-435BRM.
Metric
1
Other Routers on the Local LAN
Other routers on the local LAN must use the TEW-435BRM's Local Router as the Default
Route. The entries will be the same as the TEW-435BRM's local router, with the exception of
the Gateway IP Address.
• For a router with a direct connection to the TEW-435BRM's local Router, the Gateway IP
Address is the address of the TEW-435BRM's local router.
• For routers which must forward packets to another router before reaching the TEW-
435BRM's local router, the Gateway IP Address is the address of the intermediate router.
Static Routing - Example
Figure 47: Routing Example
For the TEW-435BRM's Routing Table
For the LAN shown above, with 2 routers and 3 LAN segments, the TEW-435BRM requires 2
entries as follows.
Entry 1 (Segment 1)
Destination IP Address
192.168.1.0
Network Mask
255.255.255.0 (Standard Class C)
Gateway IP Address
192.168.0.100 (TEW-435BRM's local Router)
Metric 2
Entry 2 (Segment 2)
Destination IP Address
192.168.2.0
Network Mask
255.255.255.0 (Standard Class C)
TEW-435BRM