Wireless station configuration – TRENDnet TEW-435BRM User Manual

Page 35

Text mode
Original mode

Wireless ADSL Router User Guide

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the TEW-435BRM's Access Point,
regardless of the operating system which is used on the client.

To use the Wireless Access Point in the TEW-435BRM, each Wireless Station must have
compatible settings, as follows:

Mode

The mode must be set to Infrastructure (rather than Ad-hoc)

Access points only operate in to Infrastructure mode.

SSID (ESSID)

This must match the value used on the TEW-435BRM. The default
value is default

Note! The SSID is case sensitive.

WEP

By default, WEP on the TEW-435BRM is disabled.
• If WEP remains disabled on the TEW-435BRM, all stations must

have WEP disabled.

• If WEP is enabled on the TEW-435BRM, each station must use the

same settings as the TEW-435BRM.