TRENDnet TEW-435BRM - Manual (Page 18)

Setup
15
Wireless Screen
The TEW-435BRM's settings must match the other Wireless stations.
Note that the TEW-435BRM will automatically accept both 802.11b and 802.11g connections,
and no configuration is required for this feature.
To change the TEW-435BRM's default settings for the Wireless Access Point feature, use the
Wireless link on the main menu to reach the Wireless screen. An example screen is shown
below.
Figure 7: Wireless Screen
Data - Wireless Screen
Identification
Regulatory
Domain Select the correct domain for your location. It is your responsibility to
ensure:
• That the TEW-435BRM is only used in domains for which is
licensed.
• That you select the correct domain, so that only the legal channels
for that domain can be selected.
Station name This is the same as the "Device Name" for the TEW-435BRM.
SSID
(ESSID)
• If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).
• To communicate, all Wireless stations should use the same
SSID/ESSID.