Toshiba PDR-M11 - Manual (Page 46)

- 42 -
Basic
Photography
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Getting Ready
Photography (Auto Photography) (continued)
Using the LCD Monitor
Get ready to take the photograph.
Load the batteries ( ➲ Page 23) and the SmartMedia™ ( ➲ Page 29) into the camera.
Set the mode dial to [ ].
Look at the image on the LCD monitor to compose the picture.
Press the shutter button down halfway 1 , and press
it down fully 2 .
• Pressing the shutter button down halfway adjusts the focus and
exposure, and pressing the shutter button down fully takes the
shot.
• When AF or AE is activated, the viewfinder lamp lights ( ➲ Page
39). When the focus and exposure are adjusted, the viewfinder
lamp turns off.
• After you have taken a picture, a preview image is displayed on the
LCD monitor for more than two seconds.
• The viewfinder lamp lights while image data is being recorded onto
the SmartMedia™.
Memo
• The LCD monitor sometimes displays bright, dark or colored spots at all times. This is not a malfunction.
These spots do not appear in the photographed image.
• The image is not displayed on the LCD monitor while the shutter button is pressed down fully.
Press down
halfway.
Press down
fully.
1
2
36-50 PDRM11-E 01.6.28, 10:17 AM 42