Toshiba e-STUDIO222cp - Manual (Page 10)

Parameter detail > 10
P-
PARAMETER
Specifies if and how to print human readable (text) characters. If this parameter is omitted
or invalid, its default value is assumed. Refer to “Default parameter values” on page 12 .
For barcodes that do not have human readable characters this parameter is ignored.
For Code39 / +CHK, if 10 is added (# = 10~15), Start/Stop bar characters (*) are printed
as human readable characters.
For UPC–A / +2 / +5 and UPC–E / +2 / +5, if 100 is added (# = 100~105), the added
character and check character are printed in 4/7 size of the other human readable
characters.
For Interleaved 2of5 +CHK, Code39 +CHK, Code128, EAN/UCC–128 and CODAR
+CHKmod16, if 100 is added (# = 100@105), the check digit is printed as a human
readable character.
VALUE PRINT IMAGE PRINT METHOD
0 Use default setting. See “Default
parameter values” on page 12 .
1 Text not printed.
2 Text embedded in bottom of
barcode.
3 Text half embedded in barcode.
4 Text below barcode.
5 Text above barcode.
#=13