Telenetics 2185 - Manual (Page 48)

Telenetics 2185
3-26
MAIN POWER CONNECTION
115 Volt Models - 115V ac models use a wall-mount transformer (Prod-
uct Code 28410?) equipped with a North American plug.
(An appropriate adapter may be used in other countries supplying 115V
ac line voltage.) This supply allows operation on 100 V ac systems.
230 Volt Models - 230 V ac models use a desktop transformer (Product
Code 28413?) equipped with a CEE7/7 plug. (An appropriate adapter
may be used in other countries supplying 230 V ac line voltage.)
Others - If the above power arrangements are not applicable to your
country, the 2185 requires a fused power supply: 24 V ac ± 10%, 50 to
60 Hz, center-tapped, at 0. 2A (order Cable Product Code 28415?).
Table 3-18. LED Status Indicator Functions
LED Indicator Function
SYSTEM
POWER Illuminates when the unit powers up
CLOCK FAIL
ALARM Illuminates when the 2185 derives its clock signal from
Subchannel 1 DCE and the clock input fails
MAIN CHANNEL
DATA Illuminates when the main channel inbound data is a
SPACE
RDY (Ready) Illuminates when the main channel inbound DSR or DTR
is ON
SUBCHANNELS 1 TO 5
ACTIVE Illuminates when the subchannel indicated gains access to
the main channel
ALARM Alarm illuminates for a channel that Is automatically dis-
abled by the anti-streaming timer. Under normal operating
conditions, all of these LED indicator lamps should be
extinguished.