Chapter 3, Introduction, Operating controls and indicators – Telenetics 2185 User Manual
Page 23: Chapter 3, operation and configuration, Chapter 3 operation and configuration
3-1
Chapter 3
Operation and Configuration
INTRODUCTION
This chapter describes the 2185 operating controls and indicators, how
to configure and operate your 2185 using these operating controls, and
how to power-up and power-down the unit.
Once configured, your 2185 operates unattended, without operator
intervention. Occasional monitoring of the LED status indicators is
recommended.
OPERATING CONTROLS AND
INDICATORS
The 14 LED indicator lamps used to monitor operating status on the
2185 are visible from the front of the unit through windows in the
swing-down front door (see Figure 3-1). All operating controls and
switches on the 2185 are readily accessible when you open the front
door (see Figure 3-2).
Figure 3-1. Front View (Door Closed)