TC electronic SDN BHD Gold Channel - Manual (Page 19)

PROGRAMS - Recall
19
The List Display
This is another way of recalling and displaying the preset lists
(Factory, User and Card), and is very useful when you are
looking for a specific preset name but cannot remember the
preset number.
You can Recall a preset directly from the List by scrolling with
the Parameter wheel. The preset name/number that is blinking
will be instantly recalled when you press Enter.
The Value wheel is used for jumping between Factory preset 001,
User preset 001, Card preset 001 and the last preset in the list.
Note: When recalling from the List display you will always get a
normal Recall of the preset, not a Total or Partial Recall.
Exercise 1:
How to Recall a preset
In this Exercise we are going to recall a couple of presets. Press
the Programs key (if you’re not already there) and select the
“Recall” page using the < > Arrow keys.
Now dial the Value wheel to scroll through the factory presets.
While scrolling you will see both the preset number, preset name
and the LED of the Enter key blinking, indicating that the current
preset has not been recalled yet.
Select preset #10 and press Enter to confirm. Preset #10 is now
recalled.
Exercise 1: How to Recall a preset
Dial Value
wheel to scroll
through
presets
Press the Enter key
to Recall the Preset ENTER
Press the Programs key PROGRAMS