Toshiba IK-TF2 - Manual (Page 28)

- 28 -
****3**** 2PULSE
Accumulation of charges is started and ended through the trigger pulse input to the RGB terminal, the
vertical sync signal is reset and field images are output.
Trigger pulse level
* (Low Level)*Less than 0.5V , (High Level)*3.4V to 5V
*RGB terminal*
Trigger pulse fetch timing
* Rising edge / Falling edge / Pulse width selectable
*When the trigger pulse fetch timing is set to pulse width
Trigger pulse width * More than 16.7ms(FLD/FRM setting*FLD)
More than 33.4ms(FLD/FRM setting *FRM)
Trigger pulse interval
* More than 16.7ms(FLD/FRM setting*FLD)
More than 33.4ms(FLD/FRM setting
*FRM)
*When the trigger pulse fetch timing is set to rising edge or falling edge
Trigger pulse width
* More than 2 s
Trigger pulse interval
* More than 16.7ms(FLD/FRM setting*FLD)
More than 33.4ms(FLD/FRM setting *FRM)