Toshiba IK-TF2 - Manual (Page 13)

- 13 -
Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The
contents once set are memorized when the power is turned off, so it is unnecessary to set again when using
the unit next time. When the setting is performed, select the menu of the item to be set.
When the power turns on, the normal screen showing only the video signal appears. Change the output
to each screen (video signal output, Index menu, and menus) by using the [DISP], [PAGE], [MENU UP], and
[MENU DOWN] buttons.
* A menu is selected when pushing the [PAGE] button after moving the “ ” on the screen by the [MENU
UP], [MENU DOWN] button while the Index menu is displayed.
7' ' ' 'MODE SETTING BY ON SCREEN DISPLAY
7
' ' ' '1 Using the Menues