Toshiba IK-TF2 - Manual (Page 16)

- 16 -
****1* ** *3**** Changing each setting in EXT TRIG mode
The EXT TRIG has three modes; 1PULSE SNR, 1PULSE SR, 2PULSE.
First set the “ ” to MODE and select EXT TRIG, then set the “ ” to EXT TRIG and select the desired EXT
TRIG mode.
****1* ** *3* ** *1**** Changing each setting in 1PULSE SNR mode
VShutter mode MANUAL, SS, EXT TRIG
-- 1 SHUTTER --
VEXT TRIG mode
MODE EXT TRIG 1PULSE SNR, 1PULSE SR, 2PULSE
EXT TRIG 1PULSE SNR
TRIG PULSE
VInput trigger pulse setting at 1PULSE SNR and 1PULSE SR
EXPOSURE 16ms
ļ The rising edge
ļ The falling edge
ļ Front and back edges of pulse
ļ Front and back edges of pulse
VExposure time setting at 1PULSE SNR and 1PULSE SR
0.06ms 0.4ms 1ms 16ms
0.02ms step 0.1ms step 1ms step
< MODE = EXT TRIG EXT TRIG = 1PULSE SNR>
Move up and down
By pushing
MENU UP,DOWN Set by pushing
DATA UP,DOWN
(a) Changing inputting trigger pulse setting
Set the “ ” to TRIG PULSE by pushing [MENU UP], [MENU DOWN] buttons.
Select either , , , by pushing [DATA UP], [DATA DOWN] buttons.
* This setting is only valid in the 1PULSE mode (1PULSE SNR and 1PULSE SR). To make the trigger
pulse setting when using the 2PULSE mode, first set the EXT TRIG mode to 2PULSE, then make the
settings with the TRIG PULSE items.
(b) Changing 1PULSE exposure time setting
Set the “ ” to EXPOSURE by pushing [MENU UP], [MENU DOWN] buttons.
Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
* When or is selected, EXPOSURE cannot be set. (EXPOSURE setting turns OFF.)
Exposure time is automatically controlled by the trigger pulse width.