Toshiba IK-TF2 - Manual (Page 27)

- 27 -
****2**** 1 PULSE SR****1 Pulse Sync Reset****
Charge begins to accumulate after the trigger input to the RGB terminal, the vertical sync signal is reset and
field images are output.
(a) Rising edge / Falling edge mode
The exposure time is set to 0.02 ms to 16 ms on the menu.
Trigger pulse level
* (Low Level)*Less than 0.5V , (High Level)*3.4V to 5V
*RGB terminal*
Trigger pulse fetch timing * Rising edge / Falling edge selectable
Trigger pulse width * More than 2 s
Trigger pulse interval
* More than 33.5 ms
ư
Exposure end
11 to 12H
Approx. 1.9 s
'INDEX'
Video output
Falling edge mode
TRIGGER
(RGB terminal)
VD output
Index output
Exposure period
Rising edge mode
(b) Width mode
Trigger pulse width
* More than 4 s Less than 255FRM
Trigger pulse interval
*
17.5ms (From exposure end to next exposure start.)
ư
Negative
Positive
Exposure start Exposure end
Exposure end
11 to 12H
'INDEX'
Video output
TRIGGER
(RGB terminal)
VD output
Index output
Exposure period
Approx. 1.9 s
Approx. 1.9 s