Toshiba Satellite Pro 6000 Series - Manual (Page 251)

251
Using Standby
Starting again from Standby
To start up the computer from Standby mode, press the power
button until the on/off light changes to green. The computer
returns to the screen you were using.
If you put the computer in Standby mode by closing the display
panel, you can start it again by opening the display panel.
NOTE: If you power down using the Standby command and
the battery discharges fully, your information will be lost. Be
sure to save your work often.
Quickly changing your Shut down mode
You can quickly and easily change your Shut down mode by using
a hot key.
To change your Shut down mode to Standby:
1 Press Fn and F3 simultaneously to display the Standby mode
pop-up window.
Sample Standby mode window
2 Click Yes to select Standby.
To change your Shut down mode to Hibernation:
1 Press Fn and F4 simultaneously to display the Hibernation
mode pop-up window.