Toshiba Satellite Pro 6000 Series - Manual (Page 153)

153 Enhancing Productivity
Inserting and removing hard drives
Sliding the module out
Inserting a module into the Slim SelectBay ®
To install a module into the Slim SelectBay, simply slide the
module all the way into the Slim SelectBay.
Inserting and removing hard drives
Your Satellite Pro
®
6100 can use various hard drive capacities.
Depending upon the original hard drive installed in your computer,
you may wish to increase storage capacity by changing the
internal drive, or you can also add additional hard drive space by
inserting a drive into the select bay module.
To change the internal hard drive.
1 Shut down your computer completely using the Shut Down
command. See
“Powering down the computer” on
page 98 .
2 Unplug the computer.
3 Close the display panel and remove any cables you may have
connected.
4 Turn the computer upside down.
5 Remove the screw on the hard drive cover.