Toshiba SATELLITE A660D User Manual
Page 201
User’s Manual
C-3
Satellite A660/A660D, Satellite A665/A665D
*1 Factory-set default channels
*2 The band width and the channel which can be used depends on the
installed wireless LAN module. And the approved channels on using are
different at each country or region. When using these channels in any
country or region, refer to the addendum sheet which is Approved
Countries/Regions for use. The channel configuration is managed as
follows:
■
For wireless clients that operate in a Wireless LAN Infrastructure,
the Wireless LAN module will automatically start operation at the
channel identified by the Wireless LAN Access Point. When
roaming between different access points the station can dynamically
switch to another channel if required.
■
For Wireless LAN modules installed in wireless clients that
operating in a peer-to-peer mode, the module will use the default
channel 10.
■
In a Wireless LAN Access Point, the Wireless LAN module will use
the factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
5GHz Band Channels Sets (Wireless IEEE 802.11 Revision a and n)
12
2467*
2
13
2472*
2
Frequency Range
Channel ID
5150-5850 MHz
34
5170*
2
36
5180*
2
38
5190*
2
40
5200*
2
42
5210*
2
44
5220*
2
46
5230*
2
48
5240*
2
52
5260*
2
56
5280*
2
60
5300*
2
64
5320*
2
100
5500*
2