Toshiba PDR-T20 - Manual (Page 61)

61
èÄîıÇ
∑
ÇÈ
Getting Ready
Playing Back/ Deleting Photographed Images
Connecting to the
PC
Other Useful
Information
T
aking Photographs
Setup Menu Items
Auto power off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful to reduce battery wear.
[
] : 1 minute (approx.)
[ ] : 3 minutes (approx.)
[ ] : 5 minutes (approx.)
Note
• Auto power off does not operate during Slideshow or when in the PC mode.
Sound
Specify whether or not beeps are to be generated when buttons or icons are
touched.
[
] : Beeps are generated.
[ ] : Beeps are not generated.
Date and time setting
Set the current date and time.
For the setting method, see “Setting the Date and Time” in
page 24.
Language
Specify in which language menus and messages are to displayed on the LCD
monitor.
[
] : English
[ ] : Japanese
[ ] : French
[ ] : German
[ ] : Spanish
[ ] : Simplified Chinese
[ ] : Traditional Chinese
System
[ ] : Shows the firmware version on this camera.
[ ] : Shows the amount of empty space in the SD card.
[ ] : Reset the frame No. If you tap the [ ] icon, the frame No. of image the
next time you photograph will start from 0001.
[ ] : Returns the settings other than date, time, and language to the factory
defaults.
[ ] : Corrects the positional misalignment of the touch panel. After the correction
screen appears, slowly tap the center of the [X] mark to perform adjustment.
When two points are tapped, the setting is saved and the setup screen is
restored.