Toshiba STRATA CIX DKT - Manual (Page 48)

The Basics
Basic SoftIPT Functions
30
Strata CIX and CTX IPT/DKT Telephone 08/07
Labeling Feature Buttons
From the Softphone Setting window, you can change six telephone button labels on a
PDA and 10 on a PC. Changing the label does not change the function. To change the
function, see
“Programming Feature Buttons” on page 127 .
Note If the headset-use feature is enabled, Line 5 (PDA) and Line 9 (PC) is set as
default and will automatically be labeled headset.
To find out what features are assigned to the feature buttons
1. Dial
#9876
to enter user programming mode.
2. Click on
HOLD
, then click on each individual feature button to see the currently
programmed feature.
Note If you reprogrammed the button functions per the instructions in the user guide,
you cannot manually exit from “programming mode.” Just wait a few seconds
for the system to time out and the SoftIPT will return to idle.
3. To exit user programming mode, wait 15 seconds and programming mode will exit
automatically.
To change Feature Button Labels on the SoftIPT
1. Click the
Setup
icon (wrench).
2. From the Softphone Setting window (shown right), type in button labels (eight
characters max.), click OK.
Can enter labels to
rename Lines 1~9
Feature Buttons.