Toshiba 52HMX84 - Manual (Page 28)

Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
28
MENU VOLUME CHANNEL EXIT TV/VIDEO
POWER
ACTION
MODE
PIC SIZE
MENU
LIGHT SLEEP
ENTER
FAV
CH VOL
EXIT
CH RTN
DVD RTN
DVD CLEAR
SLOW/DIR SKIP/SEARCH
INPUT RECALL MUTE
LINK
THE
ATE
R
FAVORITE INFO
GU IDE
SE TU
P
TITLE SUB TITLE
AUD
IO
FAV
TV
CABLE/SAT
VCR
DVD
AUDIO1
AUDIO2
1 2 3
4 5 6
7 8 9
100/ 0 ENT
+10
MENU
yzx •
MENU
x •zy
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE, and then press ENTER
to display the pull-down menu.
LANGUAGE
SET UP
CLOCK SET
A D D
E R A S E
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
S E L E C T : : SET ENTER
4. Press y or z to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.
Changing channels
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press 100,
2, 5.
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
Selecting the Quick Restart
With the Quick Restart feature set to ON, the TV stays in the
standby mode for several minutes after the TV is turned off.
If the TV is turned on from the standby mode, the full picture
appears immediately.
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight QUICK RESTART, and then press
ENTER.
3. Press y or z to select ON or OFF, and then press ENTER.
O N
O F F
S E L E C T : : SET ENTER
ON T I MER
CUSTOM
SLEEP T I MER
CC
FAVOR I TE CH
CH LABEL I NG
V I DEO LABEL
BACKGROUND
QU I CK RESTART
Channel yz
ENTER
Channel
Number
Note:
If Quick Restart is set to OFF and you turn off
the TV, it can take up to several seconds for
the picture to appear when you turn on the
TV again.
If Quick Restart is set to ON and you turn off
the TV, the following will occur for a few
minutes:
• The screen (lamp) lights dimly.
• The fans continue to run.
This is a function of the Quick Restart standby
mode and is not a TV malfunction. If you do
not prefer this, set the Quick Restart feature to
OFF.
When the Quick Restart feature is set to OFF,
if you repeatedly turn the TV on and off in a
short period of time, the useful service life for
the lamp may be shorter than the average
useful service life. See page 60.
Control touchpad on TV front