Toshiba 52HMX84 - Manual (Page 24)

Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
24
Learning about the remote control
The buttons used for operating the TV only are described here. For a
complete list of the remote control’s functions, see the “Remote
Control functional key chart” on pages 18 – 19.
POWER turns the TV on and off.
Press POWER to turn the TV on. The Red LED indicator will
be illuminated. Press POWER again to turn the TV off.
Note:
If the Quick Restart feature is in OFF mode, it can take up to several seconds for
the picture to appear. See page 28 for details.
SLEEP allows access to the automatic TV shut-off function (page 52)
LIGHT The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you’re in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100) allow direct access to channels (page 28)
MODE cycles through the six device modes: TV, CABLE/SAT, VCR,
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 20).
PIC SIZE cycles through the five pictures sizes: Natural, TheaterWide 1, 2,
3, and Full (page 32)
FAVORITE allows access to the favorite channel search function (page 39)
MENU allows access to on-screen programming menus (page 25)
ENTER sets programming menu information (page 25)
yz x • select or adjust programming menus (page 25)
FAV yz cycles through favorite channels (page 30)
CH yz cycles through programmed channels (page 27)
VOL yz adjusts the volume level
EXIT exits the programming menus (page 25)
INPUT selects the video input source (page 50)
MUTE mutes the sound (page 54)
RECALL displays on-screen information (page 59)
CH RTN returns to the last viewed channels (page 29)
POP CH yz selects the POP (picture-out-picture) channel (page 36)
SPLIT turns the POP feature on and off (page 36)
CH SCAN allows access to the programmed channel search function (page 38)
FREEZE freezes the picture. Press again to restore the picture.
SWAP switches the main and POP pictures (page 37)
POP DIRECT CH allows direct access to POP channels (page 36)
SOURCE selects the POP picture source (page 36)
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.