TRENDnet TEG-S4000I - Manual (Page 58)

GETNEXT Specify an SNMP object in a network device and
then retrieve information about the next few
SNMP objects in the device.
SET Modify and store values of SNMP objects in a
network device.
GET
RESPONSE The reply to a GET, GETNEXT, and SET
commands sent by a SNMP agent
TRAP A message sent by an SNMP agent to an SNMP
manager indicating some event occurred.
Table 6-1. The commands of SNMP management
7.
Product Specifications
This section provides the specifications of MaxSwitch IIM, and the
following table lists these specifications.
Standards IEEE 802.3 10BASE-T Ethernet,
58