TRENDnet TEG-S4000I - Manual (Page 34)

Home
The Home page displays the configuration of the Modular Switch.
System Name : An administratively-assigned name of the managed
unit, can be modified in SNMP page.
System Location : The physical location of this managed unit ( e.g.,
laboratory, 3
rd
floor ), can be modified in SNMP page.
System Contact : The contact person for this managed unit, can be
modified in SNMP page.
System Up Time : The time last since the managed unit was re-
initialized, read only.
IP Address : The IP address of the managed unit, can be modified
in IP Config page.
Subnet Mask : The subnet mask of the managed unit, can be
modified in IP Config page.
Default Gateway : The default gateway of the managed unit, can be
modified in IP Config page.
MAC Address : The MAC address of the managed unit, read only.
Firmware Version : The firmware version of the management unit,
read only. You can on-line upgrade the new firmware if the new
version is released.
Note: By default, IE4.0 does not allow Java Applets to open sockets.
The user has to explicitly modify the browser setting to enable Java
Applets to use network ports. ( See Appendix A: for the means to
modify the setting ).
34