TRENDnet TEG-S4000I - Manual (Page 24)

After connected to the Console port, turn on the PC or terminal and
configure its communications parameters to match the following
default characteristics of the console port:
Baud Rate: 9600 bps
Start Bit: 1
Data Bits: 8
Stop Bit: 1
Parity: none
Figure 4-5. The setting
of communication
parameters
You can run Hyper Terminal or a terminal emulation program using
the above settings for Console Management. After you have finished
parameter settings, press Enter on your keyboard and the Main
Menu appears.
Figure 4-6. The Main Menu
24