T-Tech TT100 - Manual (Page 9)

9
Cabinet Drawer Storage Layouts
The storage trays in the T-TECH cabinet are defined in
Figure 15. Figure 16 and Figure 17 show the tray layout
for storage of the standard fittings in trays 3 and 4
respectively. The numbers shown in the illustration are
the specific fitting number for the standard fittings and
will be referred to throughout this manual.
Note: The numbers in Figures 16 and 17 correspond
to standard fittings FIT301-FIT324. (There is no fitting
numbered FIT313.)
Figure 15.
1. Special Fittings Tray
2. Special Fittings Tray
3. Standard Fittings Tray
4. Standard Fittings Tray
5. Storage for Manual
301 302 303
304
305
306
308
307
309
310
311
312
314
RED
RED
GRN
GRN
BLU
BLU
BLU
YELLOW
315
317
316
318 319
321
322
320
323
Hose
Clamps
324
Figure 16. Standard Fittings Storage Tray (3) Figure 17. Standard Fittings Storage Tray (4)
1
2
3
4
5
TECH T- ®
Failure to follow instructions may cause damage or explosion;
always shield eyes. Read entire instruction manual before use. WARNING
Do not exceed 75 PSI input pressure when filling the T-TECH. CAUTION
Figure 15. T-TECH cabinet organization