TANDBERG PrecisionHD 1080p - Manual (Page 5)

D14245.04—DECEMBER 2008 5
PrecisionHD 1080p Camera User Guide
Getting started
Best view (face recognition)
This camera is capable of face recognition when used with
TANDBERG C90 Codecs. Observe that the feature is still a preview
feature. Consequently, the functionality is subject to change without
further notice in order to take advantage of further developments.
The face recognition system aims to search for faces in order to
optimize the picture frame, hence the name Best View. Once a face
or group of faces has been detected camera zoom and camera angle
will be changed accordingly to obtain an optimal presentation on the
screen.
Kindly observe the following:
• The Best View optimization process may take up to 5 seconds.
• The detection of faces works better when people look towards the
camera.
• The area from the eyebrows down to just below the lips should be
uncovered.
• Beard is normally not a problem.
Using Best View
Note that Best View works with TANDBERG C90 Codecs only!
1. On the TRC5 remote control press the Home key to produce the
main menu, if needed.
2. Navigate down to Settings, then press the Right arrow key
produce the submenu and press again to produce the Layout
submenu.
3. Select Selfview to be shown as required.
4. Press Home to collapse the menus
5. Navigate to Camera control and press the Right arrow key.
The soft keys menu will now be displayed as shown to the right.
6. Press the corresponding key on the remote control to start the
Best View function.
The system will now look for human faces and adjust the zoom and
camera angle to obtain a best fit.
4
7
ghi
pqrs
6
# abc/123
9
1 . @
5
0
8
jkl
tuv
2 abc 3 def
mno
wxyz
Press the corresponding
Soft key to engage the
Best View feature.
What’s in this user guide? Connecting the camera Making your own cables Remote control Contact information