Toshiba E-STUDIO 755 - Manual (Page 35)

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 33
1 TROUBLESHOOTING FOR THE HARDWARE
7 Close the front cover of the finisher.
3 Lower the guide while holding the knob.
Do not touch the stapling area (A in the figure).
The actual needle point could cause you personal injury.
4 Remove any jammed staples with something sharp.
5 Holding the knob, raise the guide, and return it to its
original position.
6 Fit the staple cartridge into the stapler.
Insert the staple cartridge until you hear a click sound (the staple
cartridge is latched). Then lower the lever slightly.
A
1
2