Toshiba E-STUDIO 755 - Manual (Page 27)

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 25
1 TROUBLESHOOTING FOR THE HARDWARE
16 Close the exit cover.
15 Turn the green knob of the fuser unit
counterclockwise to remove the jammed paper.
17 When the finisher is installed, connect it with the
equipment.
Connect the finisher with the equipment while pressing the lock lever.
Place your hand on portion A in the figure and then move the finisher
carefully.
Be careful not to let your fingers be caught between the
finisher and the equipment.
18 Turn the lever of the transfer/transport unit clockwise
by 90 degrees to unlock it. Then pull out the transfer/
transport unit.
Pull out the transfer/transport unit until it stops.
19 Open the fuser unit cover.
Do not touch the fuser unit and around the metal area around
it.
It could burn or injure you.
20 Turn the green knob of the fuser unit
counterclockwise to remove the jammed paper.
A