Toshiba E-STUDIO 755 - Manual (Page 32)

1 TROUBLESHOOTING FOR THE HARDWARE
30 Clearing a Paper Jam
5 Check the paper size registered to the drawer indicated in the message by means of the
drawer button on the touch panel.
6 Place the paper in the drawer indicated in the message. Be sure to place the same-
sized paper as the size you checked in step 5.
Printing resumes.
If you change the paper size again after printing has been completed, make sure that the size of the paper placed
in the drawer is the same as the size registered for the corresponding drawer in the equipment.
4 Close the drawer and turn on the main power switch.
The equipment starts warming-up.