Toshiba DLP 52HM95 - Manual (Page 12)

12
Chapter 2: Connecting your TV
(E) 46/52/62HM95
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
About the connection illustrations
You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in
this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those
illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual.
Connecting a digital CableCARD™
This digital television is capable of receiving analog basic, digital
basic, and digital premium cable television programming by
direct connection to a cable system providing such
programming.
A security card (such as a digital CableCARD™), provided by
your cable operator, is required to view encrypted digital
programming.
Certain advanced and interactive digital cable services (such as
video-on-demand, a cable operator’s enhanced program guide,
and data-enhanced television services) will not work with the
use of a CableCARD
™ and may require the use of a separate set-
top box from your cable operator.
For more information, call your local cable operator.
You will need:
one digital CableCARD ™ (contact your cable operator)
digital cable subscription service (contact your cable
operator)
To view encrypted digital channels:
1. Connect your digital Cable TV cable to ANT-1.
2. With the front of the CableCARD ™ facing up, insert it into
the CableCARD ™ slot on the back of the TV (see
illustration below left).
3. After the CableCARD ™ is inserted, a CableCARD ™ option
appears in the Applications menu, with informational
screens provided by your digital CableCARD
™ service. See
page 51 for additional information.
From digital Cable service
(connect to ANT 1 only)
________
CableCARD is a trademark of Cable Television Laboratories, Inc.
Note:
• Always use the EJECT button to remove the CableCARD™. Never
remove the CableCARD™ carelessly.
• Never insert any object or card (including, without limitation, a
PCMCIA card) other than a CableCARD™ into the CableCARD™
slot.
• Always make sure the CableCARD™ is facing the correct direction.
• Connect the cable for your digital cable TV service to ANT-1 only.
• When using a CableCARD™, channel programming is unnecessary
because the CableCARD™ automatically loads the cable channel
list into the TV’s channel memory (page 42).
• The CableCARD™ may take up to 5 minutes to “pair” with the TV
and download channel information. CableCARD™ information and
channels will not be available until this process is completed.
TV back panel
OUT
CableCard Connected -- Acquiring
channel information.
CableCard services will only operate
with cable signal connected to Antenna 1.
Navigate Select Back Exit CH RTN EXIT
Applications
TV Guide On Screen
Audio Player
Picture Viewer
Digital CC/Audio Selector
IP Service
Conditional Access
CableCARD(tm) Status
Network Setup
CableCARD(tm) Pairing CableCARD
This cable should be connected to ANT 1 terminal directly. If you connect
the cable via a VCR, the TV may not receive the signals correctly.
CableCARD™ technology, like all new and emerging technology, may
from time to time experience compatibility issues due to the different
ways in which television manufacturers and cable system operators
implement the CableCARD™ specifications. Most issues can be easily
resolved. If you experience any performance-related CableCAR D™
issues with your Toshiba television, please contact Toshiba
Consumer Solutions by calling (800) 631-3811 or by visiting
http://www.tacp.com/customersupport/contact.asp.
HM95_R1_012-25_061505 6/24/05, 9:12 PM 12